| CUTTING LIST |
| Overall Dimensions: 34-1/4" H x 72" W x 25-3/4" D |
| CARCASS and BOXES {C} 3/4" MDF | |||
| C1 | Top and Bottom | 2 | 24" x 72" |
| C2 | Sides and Dividers | 4 | 24" x 20" |
| C3 | Box Tops and Bottoms | 7 | 24" x 24" |
| C4 | Router Box Bottom | 1 | 22" x 24" |
| C5 | Ribs | 20 | 3" x 24" |
| C6 | Fillers | 4 | 3" x 16-1/4" |
| C7 | Router Box Slides | 2 | 2 " x 24" |
| C8 | 1/2"
sheet stock Chop Saw Fence Stop Blocks |
4 | 1-3/4" x 1-3/4" |
| C9 | Cord Cleat Face | 2 | 2" x 3" |
| C10 | Cord Cleat Base | 2 | 1-1/4" x 2" |
| TORSION BOX {T} 3/4" MDF | |||
| T1 | Top & Bottom | 2 | 24 " x 72" |
| T2 | Sides | 2 | 2-1/2" x 72" |
| T3 | Ends | 2 | 2-1/2" x 22-1/2" |
| T4 | Long Core | 3 | 2-1/2" x 70-1/2" |
| T5 | Short Core | 7 | 2-1/2" x 22-1/2" |
| T6 | 3/4"
plywood and hardwood sandwich Corner Blocks | 8 | 2-1/2" x 5-1/8" x 8-5/8" |
| T7 | Leveler block | 4 | 3" x 6" |
| CHOP SAW FENCES {F} 3/4" MDF | |||
| F1 | Faces | 2 | 4" x 25-1/2" |
| F2 | Bases | 2 | 3-1/4" x 24" |
| F3 | Brackets | 4 | 3-1/4" x 5-3/4" |
| ROUTER TABLE FENCE 3/4" MDF | |||
| F4 | Face | 1 | 4" x 25-1/2" |
| F5 | Base | 1 | 3-1/4" x 24" |
| F6 | Brackets | 2 | 3-1/4" x 4" |
| F7 | Dust Port | 1 | 4-5/8" x 5" |
| F8 | Blocks | 2 | 2-3/16" x 2-3/16" |
| DOOR AND DRIP SHIELD TRACKS {D} 3/4" hardwood | |||
| D1 | Door Tracks | 2 | 3/4" x 72" |
| D2 | Drip Shield Track | 2 | 3/4" x 29-1/4" |
| D3 | Drip Shield Bottom Stop | 1 | 1" x 72" |
| BACK, DOORS and DRIP SHIELD {D} 1/4" sheet stock | |||
| D4 | Back | 1 | 21-1/2" x 72" |
| D5 | Drip Shield | 1 | 24" x 71" |
| D6 | Door | 1 | 20-1/2" x 28" |
| D7 | Door | 1 | 20-1/2" x 19-1/4" |
| D8 | Back Track Fill Pieces | 2 | 3/4" x 3-1/4" |
| D9 | Back Track Fill Pieces | 2 | 3/4" x 4-1/2" |
| TOOL BASES {B} Sheet stock | |||
| B1 | Chop Saw Bas | 1 | 19" x 24" |
| B2 | Planer Base | 1 | 12" x 24" |
| B3 | Squared up 2x4 stock, 1-3/8" thick Support Blocks | 2 | 1-5/16"* x 24" |
| *Adjust for your planer bed height | |||
 | ||
| Sheet Goods | ||
| 4 | 3/4 in. x 4 ft. x 8 ft. MDF | $80 |
| 1 | 1/4-in. x 4 ft. x 8 ft. hardboard | $8 |
| 4 | 1/2-in. x 10-in. eye bolts | $27 |
| 4 | 1/2-in T-nuts | $3 |
| 4 | 1/2-in. x 3 in. lag bolts | $2 |
Electrical |
||
| 3 | Red wire connectors | |
| 5 ft. | #12 THHN black wire, stranded or solid | |
| 5 ft. | #12 THHN white wire, stranded or solid | |
| 5 ft. | #12 THHN green solid wire | |
| 3 | Ground screws, #10-32 | |
| 2 | 4-in. square x 1-1/2-in.deep metal junction box | |
| 1 | 4-in. square x 1-1/2-in. deep metal junction box with an attached mounting bracket | |
| 1 | 4-in. sq. raised cover for one-duplex receptacle | |
| 1 | 4-in.sq. raised cover for two-duplex receptacle | |
| 1 | Single-gang plaster ring, raised 1/2-in. | |
| 3 ft. | 1/2-in. flexible metal conduit (or length as needed) | |
| 2 | 1/2-in. flexible conduit connector | |
| 2 | 1/2-in. flexible conduit straps | |
| 3 | Duplex 15-amp, 120-volt receptacle | |
| 25 ft. | 12/3 SJ extension cord set, round cord | |
| 1 | Strain relief cord connector | |
| 1 | Plastic push-in connector for two cords | |
| TOTAL COST OF ELECTRICAL $35 | ||
HIGHLAND HARDWARE (800) 241-6748 | ||
| 1 | Router Switch with Cord Set Item #W2001 | $13 |
| 1 | Router Table Insert, Item #RM-3509 | $33 |
| 1 | Insert Template, Item #10.20.23 | $15 |
| WOODCRAFT SUPPLY (800) 225-1153 | ||
| 4 | Casters, Item #140639 | $58 |
| 2 | Knobs, Item #27R16 | $4 |
| 2 | 1/4 in. T-nuts, Item #130226 | $2 |
| MLCS (800) 533-9298 | ||
| 1 | Flush-Trim Bit, Item #7808 | $15 |
Ultimate
Tool Stand - Exploded
View & Electrical Connections -
Building the Ultimate Tool Stand - Building
the Ultimate Tool Stand (continued) -
Special
Features - Special Features (continued)
-
Cutting List & Shopping List