Core Frame Detail


TIP - MDF is prone to splitting when screws are driven into it. To minimize the problem, keep the screws in about 1-1/2 in. from the front and back edges of the top and bottom. This keeps the sides and dividers from splitting. Also, the pilot holes should be made a little deeper than usual and countersunk for the screw heads.

 

 

 
 Part Description

E1

  Red wire connectors

E2

  #12 THHN black wire, stranded or solid

E3

  #12 THHN white wire, stranded or solid

E4

  #12 THHN green solid wire

E5

  Ground screws, #10-32

E6

  4-in. square x 1-1/2-in. deep metal junction box

E7

  4-in. square x 1-1/2-in. deep metal junction box with an attached mounting bracket

E8

  4-in. sq. raised cover for one-duplex receptacle

E9

  4-in. sq. raised cover for two-duplex receptacle

E10

  Single-gang plaster ring, raised 1/2-in.

E11

  1/2-in. flexible metal conduit

E12

  1/2-in. flexible conduit connector

E13

  1/2-in. flexible conduit straps

E14

  Duplex 15-amp 120-volt receptacle

E15

  12/3 SJ cord set, round cord (remove female end)

E16

  Strain relief cord connector

E17

  Plastic push-in connector for two cords

E18

  Router switch
 
 
 

Ultimate Tool Stand - Exploded View & Electrical Connections - 
Building the Ultimate Tool Stand - Building the Ultimate Tool Stand (continued) - 
Special Features - Special Features (continued) - 
Cutting List & Shopping List